Processing carbon black for tyre manufacture in china

Usages of carbon black machine for tyre manufacture:

Our company has been the professional company with researches and produce used oil distillation machine and for 15 years’ experience. The machine is a kind of vertical shaft reflective crusher, there is the grading device in the crushing room. The waste tyre after being crushed will be collected with the function of airflow through the grading device which can replace the crushing sieve and do the two processes of fine grinding and micro-powder separating at the same time with high efficiency. It is not necessary to stop the machine to adjust the product granularity because our machine adopts the air flow regulating valve and stepless speed adjuster with the grading impeller.

Processing-carbon-black-for-tyre-manufacture

The features of carbon black pyrolysis equipment:

This kind of machine adopts new imported narrow v-belts for transmission, which has the features of high driving power, smooth running and high efficiency.

The machine has advanced cooling system. Therefore, it is very fit for processing the heat-sensitive and fibrous material.

There is no pollution in the process of operation, because the fine power will be collected by the dedusting system.

Equipped with auto-feeding and discharging, it is easy to handle and safe.

Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life Span 5-8 Years

Products Certification

product-ce1product-ce2