Converting Tires To Oil

Converting Tires To Oil Machine

Beston converting tires to oil pyrolysis plant belongs to a new type of environmental protection equipment for recycling waste tires. This plant not only solves the tires pollution problem, but also realizes the sustainable use of resources.

Beston converting tyres to oil machine adopts the advanced pyrolysis technology, which can realize tires to fuel oil conversion process effectively. And the oil yield rate can reach 45%-55%. When the whole tyre pyrolysis process is over, we also get carbon black and steel wire. The carbon black can be used for making construction bricks with clay or used as fuel. The steel wire can be sold directly or recycled to produce new steel products.

Converting Tires To Oil

Please feel free to give your inquiry in the form below. We will reply in 24 hours.
Product Model:

Your Name (required):

Your Email (required):

Your Tel (required):

Your Country:

Your Company:

Your Message (required):

Main features and advantages of Beston pyrolysis plant:

1, Safe

Hydroseal system will prevent exhaust gas from going back to condensers and reactor. Thus, unnecessary accident can be avoided. In addition, our plants are equipped with thermometer, pressure gauge, safety valve and electric control system. Once something dangerous happen, the technicians can know and take relevant measures in time.

2, Energy-saving

The reactor of our plant has the specific warm keeping design which can save fuel 30%-40%. Our plant is also equipped with extra gas recycling system. And the gas can be recycled to heat the reactor as fuel, which will save energy for the whole working process.

3, Environmental production

In the de-dusting system, we use three steps to dedust the extra gas. More than 95% of the dust would be removed. The released gas is pollution-free and can be discharged in the air directly.

 

We mainly offer six models of tyre pyrolysis plants, and they are BLJ-6, BLJ-10, BLL-16, BLL-30. And their daily capacities range from 6 ton to 50 tons. Both BLJ-6 and BLJ-10 are batch type, only BLL-16 is semi-automatic type; While BLL-30 is continuous type. The followings are the detailed parameters:

Model BLJ-6 BLJ-10 BLL-16 BLL-30
Daily Capacity 6T 10T 15-20T 30T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge, Medical Waste
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m L12.5*W2.2*H2.5m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 53.6kw/h
Floor Area (L*W*H) 20*10*10m 25*15*10m 25*15*10m 33*15*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Service Life 5-8 Years

Please feel free to give your inquiry in the form below. We will reply in 24 hours.
Product Model:

Your Name (required):

Your Email (required):

Your Tel (required):

Your Country:

Your Company:

Your Message (required):

Products Certification:

product-ce1product-ce2