For the moment, the technology of recycling tires into oil pyrolysis is widely recognized as one of the most economical and environmentally friendly methods. That’s because we can get some tire oil, steel wire and carbon black by using Beston pyrolysis equipment.

Applications of the Products
Dependent on the needs of the market, these final products producted by pyrolysis plants have wide range of applications.
Firstly, tyre pyrolysis oil not only can be used as fuel oil in industries (steel and iron factories; ceramics, power or chemical industries; hotels; restaurants, etc) but also can be further refined into diesel or gasoline.
Secondly, the carbon black from tires pyrolysis can be used for making construction bricks with clay or used as fuel.
Thirdly, the steel wire can be sold directly or recycled to produce new steel products.
Advantages of Beston Tyre Pyrolysis Machine
We have designed and produced six types of waste tire recycling equipment based on the different requirements of customers, and they are batch type (BLJ-06 & BLJ-10), semi-automatic type (BLJ-16), fully continuous type (BLL-20). The following is the advantages of our equipment:
1. Safety
The plant is equipped with mature safety devices (automatic alarm for over temperature and pressure, automatic pressure releasing system, extra gas recycling system, fire fighting devices), which can guarantee safety of the whole tyre to oil recycling process.
2. Energy-saving system
Some gas can not be converted into liquid oil under normal temperature and pressure. In this situation, this kind of gas could be recycled to heat the reactor as fuel by the extra gas recycling system. In this way, a lot of the energy will be saved.
3. Environmental protection
In the de-dusting system, three steps (water spray, ceramic ring filter, washing chamber) are used to dedust the extra gas. After these procedures, more than 95% of the dust would be removed in the tire to oil plant. The released gas is pollution-free and can be discharged into the air directly.

Specifications:
Model | BLJ-6 | BLJ-10 | BLJ-16 | BLL-20 |
Daily Capacity | 6T | 8T-10T | 15-20T | 20-24T |
Working Method | Batch | Semi-Continuous | Fully Continuous | |
Raw Materials | Waste Plastic, Tyre, Rubber, Oil Sludge | |||
Reactor Size | D2.2*L6.0m | D2.6*L6.6m | D2.8*L7.1m | D1.4*L11m |
Pattern | Horizontal & Rotary | |||
Heating Materials | Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc. | |||
Total Power | 24kw/h | 30kw/h | 54kw/h | 71.4kw/h |
Floor Area (L*W*H) | 30*10*8m | 30*10*8m | 40*10*8m | 45*25*10m |
Operating Pressure | Normal Pressure | Constant Pressure | ||
Cooling Method | Water Cooling | |||
Life Span | 5-8 Years |

Recycling Tires into Oil Process:

After-sales Service Beston Machinery Offers:
1. Design the installation drawings according to your site.
2. All-day online service. Beston personnel is available to service you at any time.
3. Periodical call visit. The call visit is to make sure that whether the waste tyre to fuel recycling plant is operating normally at present.
4. Design specific maintenance program according to different situation of your plant.
5. Installation guidance at your site. For each set of the machine, one technician will be sent to guide your installation, test the machine and train your workers. Besides, we will provide one month’s service for free.
Beston Machinery’s Certificates:
Do you want to know more about recycling tires into oil or diesel? Contact us immediately!