Recycle Old Tyres To Fuel Oil

Recycle Old Tyres To Fuel Oil

How to recycle old tyres to fuel oil? There is no doubt that we need the tire pyrolysis process. The final products we can get are fuel oil,carbon black and steel wire. Below to introduce the tire pyrolysis process:

Recycle Old Tyres To Fuel Oil

Firstly, we put raw materials into reactor by auto-feeder, then heat the reactor with coal/ wood/natural gas/oil.when the temperature reach around 250 degree celsius oil gas will produce.

Secondly, liquid oil will be cooled out by cooling system from oil gas, which is collected by oil tank.

Thirdly, the waste gas which can not be cooled out in normal pressure will be recycled to heat reactor,not only saving energy, but also protecting environment.

Working-Flow-Diagram

Fourthly, the dark smoke produced by heating reactor can achieve national emission standard through dual desulfurization and dusting removal device.

Fifthly, the temperature of reactor will be low after we get oil, at this moment carbon black will be discharged automatically.

Lastly, when the temperature falls to 100 degree celsius, worker could put steel wire hook to reactor to take steel wire out, then another batch will be begin.

Model BLJ-6 BLJ-10 BLL-16 BLL-30
Daily Capacity 6T 10T 15-20T 30T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Plastic, Tyre, Rubber, Oil Sludge, Medical Waste
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m L12.5*W2.2*H2.5m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 53.6kw/h
Floor Area (L*W*H) 20*10*10m 25*15*10m 25*15*10m 33*15*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Service Life 5-8 Years

Products Certification

product-ce1product-ce2