Beston continuous waste tyre pyrolysis plant is equipped with automatic feeding system and two sealed discharging systems, which makes it easier and more safe to operate. Second, it not only can dispose 30-50 tons of waste plastics per day, but also can work continuously for 24 hours per day without a stop. These new designs make it very popular among many customers.
A brief introduction of the continuous waste tyre pyrolysis process:
The pretreated tyres will firstly be conveyed to the moving horizontal pyrolysis reactor through feeder system. Then the tyres start to pyrolysis and oil gas will be generated when temperature rises up to 100 degrees. Then the oil gas will be cooled down by spray cooling system, it would be liquefied and then go into the oil tank. At the same time, some gas that can not be condensed to oil will come into hot air circulation heating system by secondary fire retardant damper. Then the gas will be recycled for heating reactor as gas material. The exhaust gas goes to the strong spray dedusting system for removing pollution, then the released gas will be environmental and can be discharged to the air. After finishing oil production, the slag will be discharged automatically by two sealed discharging systems.
When the whole process is over, we can get end-products that have a wide range of applications. For example, the tyres pyrolysis oil can be widely used as fuel oil in industries such as steel and iron and boiler factories, ceramics, power or chemical industries or hotels, restaurants etc. or used for generators to get electricity. The carbon black can be used for making construction bricks with clay, or used as fuel. The steel wire can be sold directly or recycled to produce new steel products.
For more information about our continuous waste tire pyrolysis plant, please feel free to contact us. We will reply you as soon as possible.
| Model | BLJ-16 | BLL-20 |
| Daily Capacity | 15-20T | 20-24T |
| Working Method | Semi-Continuous | Fully Continuous |
| Raw Materials | Waste Plastic, Tyre, Rubber, Oil Sludge | |
| Reactor Size | D2.8*L7.1m | D1.4*L11m |
| Pattern | Horizontal & Rotary | |
| Heating Materials | Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc. | |
| Total Power | 54kw/h | 71.4kw/h |
| Floor Area (L*W*H) | 40*10*8m | 45*25*10m |
| Operating Pressure | Constant Pressure | |
| Cooling Method | Water Cooling | |
| Life Span | 5-8 Years | |
Products Certification:
